Ransom Jo is turning one on Monday. His birthday party is an old man theme. (Because of his nickname, The Professor.) The kids have all had a special bib on their first birthday. I decided I wanted Ransom to have a bow tie bib. So, I sat down to figure it out. Turns out, it is really, really easy. So, here is how you can make one. (You can also make a necktie version. With all the other party stuff going on, I didn’t have time to get the necktie version done. But it is the same bib, just make a necktie shape instead of a bow tie shape.)
Here is what you’ll need:
- Fabric for the front and back of the bib. (I like to use flannel, terry, or chenille on the backs of bibs for absorbency reasons.) You’ll only need about half a fat quarter of each.
- Fabric for the bowtie. You’ll need about half to a third of a fat quarter.
- Sewing machine, scissors, thread, pins, paper, pencil, and iron. You’re usual sewing stuff.
Now, you’ll want to draft your pattern. That sounds more difficult than it really is. You can trace a bib you’ve already got or use a bib pattern that you’ve already got. Or you can wing it. I chose to wing it.
I made the top and bottom of the bib pattern about 4″ (so it’d be 8″ wide unfolded). The height is about 10″. I used my veriform curve to round the outer edge of the bib. I like the shape. It is a bit unusual without being too odd.
For the bow tie pattern, I took one of The Pastor’s bow ties and laid it on a piece of paper. You basically want to make a very short bow tie. So, I traced the outline of the end of the bow tie. If your husband doesn’t wear bow ties, you don’t know what you’re missing! Just kidding. If he doesn’t wear a bowtie, you can wing it. The hour glass shape isn’t difficult and it doesn’t have to be precise. You’ll see in a minute.
Fold your fabric in half and press. Pin the bib pattern to the fabric on the fold. Cut it out.
When you unfold it, it should look bib-like. You will need to make sure to cut the upper portion that will fasten behind the neck.
Do the same for your backing fabric. Mine is black flannel.
Now, we’re going to make a loop for the front of the bib to attach the bow tie. Take a 2″ x 4″ or more piece of fabric. Fold it in half. Press it.
Sew along the edge. Turn it.
Press the little strip so the seam is in the middle of one side. This will be the back side of the loop. (Also ignore my chipped fingernail polish. I haven’t had a chance to fix it since we went to the beach last week.)
About 2″ down in the center of the bib, sew the loop onto the front of the bib with the seam facing up. (See the picture.) Flip the strip up and press it with the iron.
Sew the loop to the top center of the front of the bib. (See above.) See how you flipped the sewn part to the inside of the loop?
Trim the excess off the loop. Even it with the top of the bib.
Pin the front of your bib to the back of the bib, right sides together. (See how you can’t see the loop?)
Sew along the edge.
Leave a hole to turn it!
Clip the corners. (Don’t want them to be “rounds”!)
Clip your curves. (It’ll help the bib lay flat once you turn and press it.)
Turn it right side out and press with the iron. Make sure you push those corners out nicely.
Topstitch. Make sure you’re close enough to the edge to close the hole!
Now you’re going to add your closure. You can do velcro, snaps, buttons, whatever. (Buttons are pretty difficult to button on an older baby.) I did snaps since I own a snap press.
Here is my snap closed.
Moving on to our bow tie. Take your pattern, lay it out on the folded fabric. Cut out 2 on the fold. (If you wanted the bow tie to be a bit more substantial, you can always add more layers of fabric or some interfacing. I found that 2 layers is thick enough for the bow to stand up and not so thick that it is difficult to tie.)
Now, I put the wrong sides together and just topstitched my bow tie. I wanted it to have a bit of a scrappy look. If you want a scrappy look, do the same. The edges will fray a bit and give it that crazed professor look to it. If you want it to be more polished, put the wrong sides together, turn, and top stitch.
Now, just slip the bow tie under the loop and tie it like a regular bow tie. Confession: I had The Pastor tie mine, since he’s the bow tie guy in our house. Don’t know how to tie a bow tie? (The Pastor learned from Dr. Tate at the birth of Ransom if you remember correctly.) Watch this video on You Tube.
And you’re done! Tip: tie the tie before you put it on the baby. You can make multiple bow ties for the same bib. You can also make a short neck tie and tie it on this bib, as well. Very versatile. It’d make an adorable baby gift! (Or first birthday party bib!)